Flexi-Seal® Waterproofing Flexi-Seal® Nail n' Screw Patch Sikasil C Bondbreaker Jointing Compound Flexi-Seal® Mega Prime 2 Part Sealer Primer Flexi-Seal® Reinforcing Bandage Flexi-Seal® Sealer Primer Flexi-Seal® 2 Part Liquid Waterproofing Membrane An Introduction to the Flexi-Seal Approved Waterproofing System Home
FreePhone: 0800 H20 TIGHT / 0800 426 844
Waterproofing Products Ideal for the New Zealand Environment

Flexi-Seal® Mega Prime
A 2 Part Sealer Primer

Flexi-Seal Sealer Primer

Stabilise non porous substrates prior to overcoating with Flexi-Seal 2 Part Waterproofing Membrane

Flexi-Seal Mega Prime is a 2 part water based epoxy primer, used to stabilise non porous substrates prior to overcoating with Flexi-Seal 2 Part Waterproofing Membrane.

It is also used to spot prime galvanised nail and screw heads and waste traps made from pvc or steel.

Typical Properties
Appearance Pinkish Liquid
Base Modified Epoxy Resin
Viscosity Thin Liquid
Coverage 10 sq metres per litre
Touch Dry Approx 15 minutes @ 20 degrees celcius
Shelf Life 12 months @ 20 degrees celcius in a sealed container

Material Safety Data Sheet available on request

 
FreePhone: 0800 H20 TIGHT / 0800 426 844
 Street Address: 67 Dalgety Drive,
Manukau City, New Zealand 		Flexi-SEAL® Waterproofing System

Flexi-SEAL® is the trademark of

BRANZ
Phone: +64 (9) 268 6970
Fax: +64 (9) 268 6971 Mailing Address: PO Box 98 866,
South Auckland Mail Centre,
Auckland, New Zealand
Email: Enquiry Form