Flexi-Seal® Waterproofing Flexi-Seal® Nail n' Screw Patch Sikasil C Bondbreaker Jointing Compound Flexi-Seal® Mega Prime 2 Part Sealer Primer Flexi-Seal® Reinforcing Bandage Flexi-Seal® Sealer Primer Flexi-Seal® 2 Part Liquid Waterproofing Membrane An Introduction to the Flexi-Seal Approved Waterproofing System Home
FreePhone: 0800 H20 TIGHT / 0800 426 844
Waterproofing Products Ideal for the New Zealand Environment

Flexi-Seal® Sealer Primer

Flexi-Seal Sealer Primer

Stabilise substrates prior to overcoating with Flexi-Seal 2 Part Waterproofing Membrane

Flexi-Seal Sealer Primer is a water based acrylic primer, used to stabilise substrates prior to overcoating with Flexi-Seal 2 Part Waterproofing Membrane.

It is suitable for use on all clean concrete, masonry block, plaster, gib, and cement sheet substrates.

Typical Properties
Appearance Off White Liquid
Base Acrylic
Solids 6.5%
Viscosity Thin Liquid
Coverage 10 sq metres per litre
Touch Dry Approx 15 minutes @ 20 degrees celcius
Shelf Life 12 months @ 20 degrees celcius in a sealed container
 
FreePhone: 0800 H20 TIGHT / 0800 426 844
Street Address: 67 Dalgety Drive,
Manukau City, New Zealand
Flexi-SEAL® Waterproofing System

Flexi-SEAL® is the trademark of

BRANZ
Phone: +64 (9) 268 6970
Fax: +64 (9) 268 6971 Mailing Address: PO Box 98 866,
South Auckland Mail Centre,
Auckland, New Zealand
Email: Enquiry Form